Aftermarket Assassins Stage 4 Recoil Clutch Kit RZR Turbo (2016-2020)
Aftermarket Assassins Stage 4 Recoil Clutch Kit RZR Turbo (2016-2020)

Aftermarket Assassins Stage 4 Recoil Clutch Kit RZR Turbo (2016-2020)

116-1006

Regular price$1,650.00
/
Shipping calculated at checkout.

Vehicle Model
Helix Angle
  • Free Shipping Over $100*

Aftermarket Assassins Stage 4 Recoil Clutch Kit RZR Turbo (2016-2020)

Fits 2016-20 RZR XP Turbo & Turbo S Models 2 & 4 Seat
** DOES NOT FIT 2021 MODELS**

Aftermarket Assassins S4 recoil clutch kits pack a huge punch! No matter the terrain, they hit hard and just keep pulling for days. On the trail or at the race you'll notice wicked acceleration and instant clutch response when getting back into the throttle after hammering that corner. In the dunes you'll see the same benefits, but also have much less bogging when climbing that big dune. The machine will hold RPM so you can get where you need to go, and get there faster!

Going mudding? Aftermarket Assassins mud setup will help turn those tires through the thick and deep with much better RPM and wheel speed that's key to climbing out of that hole. We have a huge amount of CVT knowledge, a great passion for the sport, and spent many hours testing different setups in the real world. We know you'll be extremely pleased with the performance gain from our clutch kits!

S4 kits include Aftermarket Assassins custom cut helix which will give you better power to the wheels on 2017-18 models because of the slightly steeper angle. All models will see a more consistent RPM sweep. Factory helixes start off steep, then go shallower on the top end. For turbo machines, this is completely backwards. We run a straight angle as changing the load on a heavy machine in the middle of a shift can cause some issues. Basically, 2016 helixes were too steep and therefore had belt issues, 2017 helixes went MUCH shallower and the performance to the wheels suffers. We found just the right angle to make everything happy with great belt life and great performance.

  • Kits are build to order with a 3-5 day lead time
  • Complete clutches assembled with our AA performance clutch kit parts. This kit is normally for those who have clutches that are worn out. Let us know your exact model, modifications and tire size. We'll set your clutches up so they are ready to bolt on. Keep in mind vehicles vary so while they come set up, some minor weight adjustments might be necessary.
  • AA designed/tested/inspected high quality replacement clutches
  • Kits work great with both stock or modified machines
  • A must have when tuning your RZR turbo
  • A must have when running larger tires or paddles
  • Huge acceleration gains
  • Wicked throttle response when on & off the throttle
  • More efficient power transferred to the wheels
  • More consistent clutch performance
  • Cooler running belt temps (especially when running larger tires or paddles!)
  • Longer belt and clutch life
  • Easily adjustable if needed
  • Performance Helix 1031 (aggressive holeshot): For 2017-2020 2 seat XPT & Turbo S using 28-32" Tires / 28-32" paddles. Only helix we recommend for¬†ALL 2016¬†models (due to lower gearing)¬†unless¬†running larger than 33" tires. This helix works excellent for the listed setups and has a more aggressive shift angle from 0-25 MPH over the 1024 performance helix. This is best for holeshots and aggressive riders that are trail riding, dune riding, racing, and drag racing. This setup will still crawl good when needed, but if your riding is more slow speed/crawling, we'd suggest the 1024 helix.
  • Performance Helix 1024: For 2017-2020¬†2 or 4 seat XPT & Turbo S 28-33" Tires/paddles. The only difference over the 1031 performance helix is the shift angle from 0-25 MPH is slightly less aggressive. This makes it better for crawling and those slow speed situations, but it still pulls like crazy when needing to accelerate hard. A great all around helix choice.
  • High Load Helix 1021: For 2017-2020 2 seat XPT/Turbo S 34-35" Tires. For 4 seat XPT 32-35" tires / 32" paddles. If you are using very large/heavy tires, the high load helix might be the choice for you. The high load helix is recommended for those turning heavy 32-35" tires. This angle slows the shift down to help act like it's "gearing down" the secondary clutch. This helps not over shift and cause belt slip in those higher load situations. If you mostly use your RZR to crawl and/or have heavier 32-35" tires you may want to use this helix. If you have a heavy 4 seat and running 32" paddles, this would also be a good helix for you.
  • ¬†If you need a higher engaging spring for drag racing please let us know.¬†
  • Our Recoil clutch weights are easily adjustable with simple magnets. They have a custom AA profile, the BEST coating on the market(nitrocarburizing) which has increased wear resistance, improved fatigue strength, and added surface lubricity. These clutch weights also offer great performance, and the ability to tune for many different applications or modification in the future, without the need to buy extra parts. The magnetic weights are the best option to properly place the mass where we need it on the weight for best performance for your application.
  • While this clutch comes pre set, a setup guideline is included which shows the best setups for dunes, mud, or all around trail riding. This also has brief instructions on installing your clutch kit, and other important information. View our installation instruction video HERE. Keep in mind all you will need to do is bolt the clutches on and not need to disassemble. Instructions show clutch disassembly.
  • Kits include: Both primary and secondary with the following installed: AA Recoil magnetic adjustable clutch weights, primary spring, AA primary limiter, secondary spring, AA custom helix & setup guidelines/instructions.
  • The only tool needed is this¬†CLUTCH PULLER. ¬†Warning: many of the XPT primary clutches are on the crank very tight(tapered fit). If removing the primary, make sure you use plenty of grease on the puller tip and threads. A hammer might be needed to pop the clutch off.
  • We'd HIGHLY recommend using our¬†Snap Ring Delete Kit¬†when installing this kit on 2016-2018 models.
  • We also recommend the¬†Primary Clutch Fan Blade¬†for reduced temps (must be used with stock cover), or the even better the¬†Revolver Cover with Tower Lock¬†which reduced temps but also increased clutch strength (cannot be used with AA Primary Clutch Fan Blade)


Free Shipping
At our company, we are proud to offer our valued customers free ground shipping on most orders over $100, a fantastic incentive to help you shop for your favorite items. Please note, this offer is applicable only to the lower 48 states within the United States. We strive to ensure that your products reach you in a timely and cost-effective manner. However, we would like to inform you that certain exclusions may apply due to the size, weight, or destination of the order. We kindly encourage you to review our shipping policies or reach out to our customer service team for any clarifications. We are committed to providing the best shopping experience possible, with quality service at every step of your journey with us.

Shipping
Shipping to US with verified payment & confirmed address. Domestic shipments are a mix of services from UPS, USPS, and FedEx. All packages may require a signature.

Delivery
Most of our products ship within 1 Business Day - Occasionally, we are out of stock on an item and will sometimes use a drop ship from one of our suppliers. Drop ships from a handful of suppliers can add up to 5 days processing time.

Refunds & Returns
PLEASE CALL US FIRST for an RMA (Return Merchandise Authorization) #.

All returns made to Revolution Off-Road, LLC must be in the original box with all parts included in new condition.
All returns must be sent with a copy of the original receipt, explanation of the problem and an RMA #.
All returns for must be received by Revolution Off-Road, LLC within 15 days of the product being received by the customer. (determined by UPS tracking #)
Customer is 100% responsible for ALL shipping costs on returned items. Thus, if you return an item and did not originally pay shipping costs, the original shipping cost incurred by us will be deducted from your refund.

Orders canceled by the customer will be subject to a 10% cancelation fee. 

Any shipping costs paid by customer on original order, including ground shipping or expedited shipping will not be refunded including in the event of a return. 


Credit will be issued after the product and its contents are inspected and found to be in brand new condition as shipped to the buyer.
All returns will be subject to a 20% - 30% restocking fee, depending on the manufacturer.
Shipments refused by you (the Customer) and returned back to Revolution Off-Road will carry an automatic 20% re-stocking fee deducted from the total credit owed.

Credit will not be issued in the following situations:
Product has been installed and or used. Product has been damaged from an attempt to install and/or use.
Product is shipped back without original box, manual and/or parts.
Seal on electrical parts is broken, or it is evident that electrical part has been installed to vehicle.
Product serial number does not match what was originally shipped to buyer.-Product is deemed not re-sellable due to customer's actions.
Electrical components after they have been installed.

Product Warranties
Revolution Off-Road, LLC honors all manufacturer warranties. Any product that carries a manufacturer warranty must be warrantied through its respective manufacturer. Installed components which have failed must be removed and shipped back to its manufacturer for inspection before replacement. Revolution Off-Road, LLC is not responsible for shipping products to manufacturers for inspection or the return shipping to the end user. Labor time is not paid by Revolution Off-Road, LLC.

Damaged Products
If a products arrived damaged you must contact Revolution Off-Road, LLC WITHIN 5 BUSINESS DAYS. Do not install the product as the manufacturer will handle shipping a replacement item. If you install the product then it will void any shipping claim as the product will need to be reviewed by sending pictures of any damage. Once again review your product before attempting to install it, if any damage is found, do not install.

Cores
There is a 30 day turnaround policy on cores from the time it was delivered.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.