Login

Cart

Your cart is empty
Aftermarket Assassins Stage 2 Clutch Kit RZR RS1

Aftermarket Assassins Stage 2 Clutch Kit RZR RS1

Aftermarket Assassins
SKU: 102-1007
Sale price$295.00
Select Kit:
Snap Ring Delete Kit:
Primary Clutch Limiter:

Aftermarket Assassins Stage 2 Clutch Kit RZR RS1

Fits all 2018-Up RS1 models

 

Aftermarket Assassins S2 Recoil Clutch Kits pack a huge punch! No matter the terrain, they hit hard and just keep pulling for days. On the trail or at the race you'll notice wicked acceleration and instant clutch response when getting back into the throttle after hammering that corner. In the dunes you'll see the same benefits, but also have much less bogging when climbing that big dune. The machine will hold RPM so you can get where you need to go, and get there faster!

Going mudding? Aftermarket Assassins mud setup will help turn those tires through the thick and deep with much better RPM and wheel speed that's key to climbing out of that hole. We have a huge amount of CVT knowledge, a great passion for the sport, and spent many hours testing different setups in the real world. We know you'll be extremely pleased with the performance gain from our clutch kits! 

Aftermarket Assassins Recoil clutch weights are easily adjustable with simple magnets. They have a custom AA profile, the BEST coating on the market (nitrocarburizing) which has increased wear resistance, improved fatigue strength, and added surface lubricity. These clutch weights also offer great performance, and the ability to tune for many different applications or modification in the future, without the need to buy extra parts. The magnetic weights are the best option to properly place the mass where we need it on the weight for best performance for your application.

  • Choose the standard trail kit or race kit. Standard trail kits have a smooth engaging spring while race kits have a higher and more harsh engagement for better holeshots.
  • Kits work great with both stock or modified machines
  • A must-have when fine tuning your RS1
  • A must-have when running larger tires or paddles
  • Wicked throttle response when on & off the throttle
  • More efficient power transferred to the wheels
  • More consistent clutch performance
  • Cooler running belt temps (especially when running larger tires or paddles!)
  • Longer belt and clutch life
  • Easily adjustable if needed
  • An initial setup guideline is included which shows the best setups for dunes, mud, or all around trail riding. This also has brief instructions on installing your clutch kit, and other important information. While it is on a RZR turbo (same clutches), you can View our installation instruction video HERE 
  • Kits include: AA Recoil magnetic adjustable clutch weights, primary spring, secondary spring, & setup guidelines/instructions.
  • If you need a higher engaging spring for drag racing see HERE
  • Do you ride trails and dunes? While our weights are adjustable to compensate for nearly any condition, swapping a primary spring to gain RPM lost in the dunes is much simpler. Some may want our TEAL PRIMARY SPRING which increases peak RPM by 200-300, which is what is normally lost with paddle tires/sand. This teal spring normally engages around 2100-2300 RPM which is slightly higher than our standard spring, but not crazy high or uncontrollable.
  • The only tool needed is our Compression Tool #1.  The primary components can be done with the clutch on the machine. If you'd like to pull the primary to check the bolts behind it, or just to make installation easier, use this CLUTCH PULLER. Warning: many of the XPT primary clutches are on the crank very tight(tapered fit). If removing the primary, make sure you use plenty of grease on the puller tip and threads. A hammer might be needed to pop the clutch off.
  • We'd HIGHLY recommend using our Snap Ring Delete Kit when installing this kit on 2018 models. Makes life much easier!
  • We also recommend our AA Primary Spring Limiter which helps reduce heat and centers the spring and our Primary Clutch Fan Blade (for stock clutch covers only, NOT for use with the Revolver Billet Clutch Cover) for reduced temps
  • We highly suggest upgrading to our Revolver Billet Clutch Cover with Tower Lock to increase primary clutch strength and cooling (Note, will NOT fit with the AA Primary Clutch Fan Blade)
  • Don't for get a new belt and we have the Worlds Best Belt by Gboost (our Stryker)
  • Primary and Secondary clutch in need of a rebuild? Check out our RZR Turbo Extreme HD Clutch Rebuild Kit.
  • Part number: 102-1007
Aftermarket Assassins Stage 2 Clutch Kit RZR RS1
Aftermarket Assassins Stage 2 Clutch Kit RZR RS1 Sale price$295.00

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)