Parking Brake CanAm X3 | Spring Brake Thingy

FITS ALL CANAM X3 MODELS

YOU NEED THIS! We have all done it, parked our X3 on a hill and have fought to get it out of park. This is hard on the shifting cable as well as the transmission. With this Brake, you set the brake then put it in park. This way your X3 is being held by the brakes instead of the transmission. 

Installs in about 10 minutes, guaranteed the quickest and easiest install and use on the market.  

1. Remove 2 plastic rivets from fire wall.
2. Install brake assembly, insert supplied 1/4" bolts through each hole.
3. Install backing plate onto front of fire wall over the bolts. Install plate to match the shape of the fire wall.
4. Install supplied lock nuts and flat washers and tighten.

To operate, place brake petal with right foot, slide red locking arm over the brake pedal with left foot.  To release push the brake pedal.  

The parking brake assembly may appear to flex, this is due to the plastic fire wall not the brake hardware.  The parking brake will still function and hold the brake.