Honda Talon 1000R 8" Portal Gear Lift
Honda Talon 1000R 8" Portal Gear Lift
Honda Talon 1000R 8" Portal Gear Lift
Honda Talon 1000R 8" Portal Gear Lift
Honda Talon 1000R 8" Portal Gear Lift

Honda Talon 1000R 8" Portal Gear Lift


Regular price$4,499.95
Shipping calculated at checkout.

Do you have a lift kit?
Do you need a frame stiffener?
Portal Housing Material
  • Free Shipping Over $100*
Gear Down and Go Big
Your 68” wide Honda Talon is built for action—that’s why you bought it after all. But if you want to take your side-by-side to the extreme, you need SuperATV’s 8” GDP Portal Gear Lift. It gives you a massive lift and a 45% gear reduction. That gives you room to run massive tires and tons of torque for quick acceleration. It’s the ultimate UTV lift.

GDP—the Most Trusted Name in Portals
Why should you choose GDP? That’s easy—with top notch quality and an unbeatable track record, it’s the best choice. If you don’t believe us, just ask any of the thousands of riders out on the trail every day rolling on GDP Portals.

Perfect for Mud
There’s no better way to tackle a killer mud hole than rolling on a set of portals. The extra ground clearance keeps you from getting bogged down, and the 45% gear reduction keeps your huge tires turning to keep you moving forward.

A Gear Reduction That Protects Your Drivetrain
Because the gear reduction goes into your hub instead of your transmission, your entire drivetrain benefits from it. Your axles, differential, prop shafts, and transmission all experience less stress than they would on your stock machine. You ride harder and your machine runs better.

Learn more about how tire size and gear reduction can unleash your machine’s potential.

Unmatched Gear Material
We use 9310 alloy steel in our gears becuase nothing can beat it. But materials aren’t the whole story. These gears are precision ground so they mate perfectly every time and you get smooth, quiet portals no matter how hard you go.

Stronger Housings by Design
GDP makes the strongest portal housings you can get. So whether you choose a cast or billet aluminum housing, you get an awesome case that’s built to perform out on the trail. They’re built with experience and know-how—they can’t be beat.
    • Our housings are reinforced in all the right places
    • They’re built with better oil flow and gearing forces in mind
    • There are no gimmicks and no vents because vents do more harm than good—we know because we tested them

The Strongest Portal Backing Plates You Can Get
The backing plates hold your whole suspension together so we had to make them beefy. That’s why we use a special steel alloy that’s stronger than chromoly steel. At 5/16” thick, our hand welded backing plates aren’t just bulletproof, they’re one of the strongest parts on your machine.

Advanced Gaskets and Seals
Whether you go with cast or billet, both housings use:
    • Advanced Thermo-Tork® gaskets with excellent oil resistance and a lower deterioration rate than Kevlar gaskets
    • Rubber O-rings that completely seal the housings
    • A sealed input gear and double-lipped output seal
    • 100% sealing coverage throughout so you can forget about oil leaks

Bearings That Rock
Even the smallest parts on GDP portals are made with performance in mind. Our output bearings are double-angular contact bearings that are tough enough to take any trail. They’re designed to handle axial loads and extensive torque without breaking—bumps, rocks, and logs won’t wear out these bearings.

Universal Hubs and Slotted Rotors
Our precision-ground, stainless steel slotted rotors stay cool to give you the braking power you need when you need it. They come with 4/156, 4/137, 4/115, and 4/110 bolt patterns and lugs. Because these are the most popular side-by-side bolt patterns, you can fit just about any UTV wheels you get your hands on assuming they’re big enough. We invented the tapered output shaft that our hubs attach to, which provides a more secure lock that won’t wobble or wear over time.

Reinforce Your UTV with a Frame Stiffener
Your Talon 1000R is built for speed, which means that when you load it up with 8” portals and slam into the whoops, you’re gonna bend your frame. That’s why a frame stiffener is required. It’s a heavy-duty stiffener for heavy-duty portals.

Top-Rated Customer Service
Still need a little help getting exactly what you need? We’ve got a dedicated team just for portal support. Give us a call so we can get the perfect set of portals in your hands today.

Honda Talon 1000R Portal Gear Suspension Recommendations Max Tire Size Required Suspension Setup with 8" Portals 42" Stock 43" 3" Lift Kit Max tire sizes are measured at full compression and full turn. The given tires sizes are the largest we fit without rubbing. With minor trimming or a small amount of rub, larger tire sizes can be used.
8” Portal Gear Lift Includes: (4) Assembled portal hub boxes complete with 9310 gears, seals, output shaft, Thermo-Tork® gaskets, and thrust bearings (4) Universal hubs and precision-ground stainless steel slotted rotors with lugs (4) Specialized steel alloy backing plates (2) Rear bearing carriers (4) Steel caliper mounting plates (8) Caliper mounting plate spacers Extended brake lines All required hardware, including recessed castle nut socket Frame stiffener (must select at checkout)
  • Available with billet or cast aluminum housing
  • Cool, quiet, precision ground gears made from 9310 alloy billet steel
  • 1.5 in. diameter 4340 hardened steel driveshaft
  • 1.5 in. forward and rear offset
  • Housings use Thermo-Tork® gaskets and rubber O-rings that don’t let anything through
  • Universal hub fits all major bolt patterns 
  • Gear reduction reduces stress on your drivetrain
Wheel Requirements:
  • 22" or larger wheel required
  • Wheels cannot exceed 5" backspacing
  • Honda Talon 1000R : 2019+
NOTE: Wheels need to have a center hole of at least 3.25" (82.55mm) or require a 1” wheel spacer.

Free Shipping
At our company, we are proud to offer our valued customers free ground shipping on most orders over $100, a fantastic incentive to help you shop for your favorite items. Please note, this offer is applicable only to the lower 48 states within the United States. We strive to ensure that your products reach you in a timely and cost-effective manner. However, we would like to inform you that certain exclusions may apply due to the size, weight, or destination of the order. We kindly encourage you to review our shipping policies or reach out to our customer service team for any clarifications. We are committed to providing the best shopping experience possible, with quality service at every step of your journey with us.

Shipping to US with verified payment & confirmed address. Domestic shipments are a mix of services from UPS, USPS, and FedEx. All packages may require a signature.

Most of our products ship within 1 Business Day - Occasionally, we are out of stock on an item and will sometimes use a drop ship from one of our suppliers. Drop ships from a handful of suppliers can add up to 5 days processing time.

Refunds & Returns
PLEASE CALL US FIRST for an RMA (Return Merchandise Authorization) #.

All returns made to Revolution Off-Road, LLC must be in the original box with all parts included in new condition.
All returns must be sent with a copy of the original receipt, explanation of the problem and an RMA #.
All returns for must be received by Revolution Off-Road, LLC within 15 days of the product being received by the customer. (determined by UPS tracking #)
Customer is 100% responsible for ALL shipping costs on returned items. Thus, if you return an item and did not originally pay shipping costs, the original shipping cost incurred by us will be deducted from your refund.

Orders canceled by the customer will be subject to a 10% cancelation fee. 

Any shipping costs paid by customer on original order, including ground shipping or expedited shipping will not be refunded including in the event of a return. 

Credit will be issued after the product and its contents are inspected and found to be in brand new condition as shipped to the buyer.
All returns will be subject to a 20% - 30% restocking fee, depending on the manufacturer.
Shipments refused by you (the Customer) and returned back to Revolution Off-Road will carry an automatic 20% re-stocking fee deducted from the total credit owed.

Credit will not be issued in the following situations:
Product has been installed and or used. Product has been damaged from an attempt to install and/or use.
Product is shipped back without original box, manual and/or parts.
Seal on electrical parts is broken, or it is evident that electrical part has been installed to vehicle.
Product serial number does not match what was originally shipped to buyer.-Product is deemed not re-sellable due to customer's actions.
Electrical components after they have been installed.

Product Warranties
Revolution Off-Road, LLC honors all manufacturer warranties. Any product that carries a manufacturer warranty must be warrantied through its respective manufacturer. Installed components which have failed must be removed and shipped back to its manufacturer for inspection before replacement. Revolution Off-Road, LLC is not responsible for shipping products to manufacturers for inspection or the return shipping to the end user. Labor time is not paid by Revolution Off-Road, LLC.

Damaged Products
If a products arrived damaged you must contact Revolution Off-Road, LLC WITHIN 5 BUSINESS DAYS. Do not install the product as the manufacturer will handle shipping a replacement item. If you install the product then it will void any shipping claim as the product will need to be reviewed by sending pictures of any damage. Once again review your product before attempting to install it, if any damage is found, do not install.

There is a 30 day turnaround policy on cores from the time it was delivered.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.