UTV Stereo Ride Command Amp Harness With Turn On Delay Regulated Harness For Ride Command Equipped RZR's
Eliminate Common Ride Command Issues with Our REGULATED Ride Command Harness!
Are you experiencing a "turn on pop," an amp that won't stay on, or an amp that won't shut off? Say goodbye to these common Ride Command problems with our REGULATED Ride Command Harness! This essential accessory regulates the voltage on the blue remote out wire, effectively fixing these issues. 🔧
The REGULATED Ride Command Harness is similar to the Standard Harness, with the key difference being the regulated remote output. This feature ensures a smoother and more reliable audio experience for your Polaris vehicle. 🎶
Installing the harness couldn't be simpler. Just plug it into AMP1, AMP2, or AMP3, then connect the RCAs and Remote to your amplifier – it's that easy! No need for complicated wiring or expert assistance. 🔌
Don't let common Ride Command issues ruin your audio enjoyment. Equip your system with our REGULATED Ride Command Harness and experience hassle-free, high-quality sound every time! 🚀
Hit the link for detailed instructions: Regulated RC Harness Instructions
*Works on 2 and 4 seat Models
Factory Ride Command Plugs:
Factory Plug AMP1 (they are labeled) is the front output, full range. Controlled by “front” on Ride Command
Factory Plug AMP2 (they are labeled) is the rear output, full range. Controlled by “rear” on Ride Command. *Tip! For Installs where you are installing a sub woofer but do not have a sub control knob and you do not need a front to rear fader for the highs, you can use the rear output as a sub channel. Then by fading front to rear you have some control over the level of the sub woofer. So fading to front produces less sub output, and fading to rear produces more sub output by lowering fronts.
Factory Plug AMP3 (they are labeled) full range output. Not independently controlled by Ride Command, no on screen adjustments. This is a good option for sub woofer.
