Rockford Fosgate Stage-1 Audio System (Gen-3) For 2014+ RZR XP1000, XP Turbo & Turbo S
The Rockford Fosgate Gen-3 Stage 1 kit sounds like a fantastic choice for anyone looking to upgrade their audio system on select RZR models. Here's a simple installation guide:
-
Check the Package: Make sure all the components are present in the package. This should include a PMX-1 digital media receiver, an upper/lower dash kit, front speaker enclosures, M0 6.5" speakers, and all the necessary mounting and installation hardware.
-
Disconnect Battery: Before you start, make sure to disconnect the vehicle's battery to prevent any short circuits or electrical damage during the installation.
-
Install the PMX-1 Digital Media Receiver: Install the PMX-1 digital media receiver in the dash using the dash kit provided. The dash kit should allow you to securely mount the receiver in either the upper or lower dash, depending on your specific RZR model.
-
Install Speaker Enclosures: Install the speaker enclosures in the designated areas. These areas can vary depending on your RZR model, so refer to your vehicle's manual or the kit instructions for specific placement.
-
Install M0 6.5" Speakers: Install the M0 6.5" speakers into the speaker enclosures. The kit should include necessary hardware for mounting these speakers. Ensure the speakers are securely fastened in place to prevent any rattling or movement when the vehicle is in use.
-
Connect Wires: Run and connect the necessary wires from the digital media receiver to the speakers. The receiver should have output channels that correspond to each speaker.
-
Reconnect Battery and Test: Once everything is installed and wired correctly, reconnect the battery. Turn on the system and play some audio to ensure everything is working correctly.
-
Adjust Settings: Adjust the settings on your PMX-1 digital media receiver to get the sound to your liking. This may include adjusting the bass, treble, balance, and fade.
Remember, safety comes first. If you're not comfortable with this installation or if it seems beyond your skill level, it might be a good idea to hire a professional to avoid damaging your new kit or your vehicle. Enjoy your upgraded audio experience!
Features:
- Complete Element Ready™ audio system
- No drilling or cutting required
- Radio kit replaces factory lower (2014+) or factory upper (2019+) pocket
- PMX-1: Punch Marine Grade Media Receiver with 2.3" Dot Matrix Display
- Plug-n-Play wiring harnesses for select RZR models
- RZR14-DK: Upper/Lower Dash Kit for most PMX source units on select Polaris® RZR® Models
- RZR14-FSE: Color Optix™ 6.5" Front Loaded Speaker Enclosures for select Polaris® RZR®
- M0-65B: M0 6.5" Marine Grade Speakers - Black
- Includes wired antenna
The complete Element Ready™ audio system provides a seamless and enhanced audio experience without the need for drilling or cutting. This kit is designed to replace the factory lower pocket in 2014 and later models, or the factory upper pocket in 2019 and later models. The system comes with the PMX-1 Punch Marine Grade Media Receiver featuring a 2.3" Dot Matrix Display, ensuring a high-quality audio output. To facilitate the easy installation process, plug-n-play wiring harnesses are provided for select RZR models. The kit also includes the RZR14-DK upper/lower dash kit, which is compatible with most PMX source units on select Polaris® RZR® Models. Further enhancing the audio quality, the system includes the RZR14-FSE Color Optix™ 6.5" front loaded speaker enclosures designed specifically for select Polaris® RZR® models. The speakers provided are the M0-65B M0 6.5" Marine Grade Speakers in black, known for their robust performance. To round out the system, a wired antenna is included to ensure strong signal reception.
Plug-and-Play Design: No drilling, no cutting and designed to work right out of the box. Simple installation ensures less time in the garage and more time out riding.
Element Ready™: Purpose built for the off-road environment, Rockford’s Element ReadyTM products are built to stand up to water, dirt, mud and UV rays, making sure all your audio components perform regardless of the conditions.
RF3 (Rockford Factory Fit & Finish): Designed and engineered to match and compliment the factory fit and finish of your vehicle. These components are purpose built to the exact specifications to ensure the best in class fitment and look.
Connectivity Control: With Bluetooth connectivity, AUX and USB inputs, it’s easy to control your music or even charge your phone, no matter where the trail takes you.
Fitment
2014-2021 Xp1000
2016-2021 Xp Turbo
2019-2021 Turbo S
