Attach top of sway bar link with nut and bolt. Use Quick Disconnect Pins for bottom connection to trailing arm bracket. Simply remove Lock Pin to remove Quick Disconnect Pin to unhook your sway bar and cable tie sway bar link up and out of the way for rock crawling. When you are back on the dessert trails or high speed mountain trails, cut the cable tie, reposition sway bar link to trailing arm, slide the Quick Disconnect Pin back in place and apply Lock Pin. Now you are linked back up with full sway bar function. Easy, quick and effective for those serious about rock crawling performance from there RZR XP 1000. Instructions included in package.
(2) Quick Disconnect Pull Pins
(2) Compression Rubber O-Rings
(2) Lock Pins
*Compression Rubber O-Rings used to guarantee a tight fit and eliminate rattles at trailing arm connection point.
Rear Sway Bar connection will only require 1 washer.
Front Sway Bar connection will require both washers.