Aftermarket Assassins Stage 3 Clutch Kit with Heavy Duty Primary Polaris Ranger 1000 (2018-2020)
103-1021
- Free Shipping Over $100*
Aftermarket Assassins Stage 3 Clutch Kit with Heavy Duty Primary Polaris Ranger 1000 (2018-2020)
- Fits All 2018-20 STD Ranger 1000 Models & 2019-20 Ranger 1000 Crew Models with the NEW Ranger 1000 Body Style
- **Does not fit Ranger 61HP Single Cam Models**
Aftermarket Assassins S3 Recoil Clutch Kits pack a huge punch! No matter the terrain, they hit hard and just keep pulling for days. On the trail or at the race you'll notice wicked acceleration and instant clutch response when getting back into the throttle after hammering that corner. In the dunes you'll see the same benefits, but also have much less bogging when climbing that big dune. The machine will hold RPM so you can get where you need to go, and get there faster!
Going mudding? Aftermarket Assassins mud setup will help turn those tires through the thick and deep with much better RPM and wheel speed that's key to climbing out of that hole. We have a huge amount of CVT knowledge, a great passion for the sport, and spent many hours testing different setups in the real world. They will simply help primary clutching and get things dialed in to where they should be.
For extra performance and power on Rangers with 27-30" tires and OEM gearing, try the Performance Helix 107-1043 - an aggressive helix designed for those who drive at a fast pace. If you want slightly less aggression with good acceleration gains, try the High Load Helix 107-1042 - ideal for heavier vehicles and 31-35" tires with gear reduction.
No matter which setup you choose, Aftermarket Assassins will help primary clutching get where it needs to be for an unbeatable ride!
Performance Helix 107-1043: Aggressive helix with acceleration/higher horsepower/aggressive fast pace drivers in mind. Works best on Rangers with 27-30" tires and OEM gearing or those running 31-35" tires with gear reduction.
High Load Helix 107-1042: Slightly less aggressive than the 1043 helix with good acceleration gains/power transfer over the OEM helix. Designed for a heavier vehicle, heavier tires, heavy sand load or crawling type riding in mind. Works best on Rangers with 31-35" tires and OEM gearing. Excellent all around helix for any Ranger!- From trail rigs to high horsepower setups, this is the only clutch we will run on our shop vehicles
- This kit includes our complete heavy duty AA primary clutch. This clutch is the same design found on the 2016-2020 RZR Turbo models with an encapsulated tower design. We found this clutch to hold power better, hold up better (no exploding), and slip the belt less. It simply meets the demands of these high horsepower vehicles, and is proven. This clutch also holds belt grip better than billet clutches, especially at higher RPM. This primary clutch is our own version made with higher grade tool steel for the post, assembled with AA HD sliders, to our AA specifications.
- With this clutch you'll notice better power transfer (better acceleration) and lower belt temps than your OEM P90X clutch or any other aftermarket clutch
- Kit Includes: AA Primary Clutch, Primary Bolt, AA magnetic adjustable clutch weights, AA primary spring, weight setup sheet, custom primary spring limiter, AA secondary spring, our AA custom cut helix, and now includes AA Extreme Heavy Duty primary sliders (comes installed in clutch).
- Primary clutch does not come assembled. Simply setup your weights according to our setup chart, then install the weights & Spring. Otherwise we have the +$25 option to have us assemble the primary clutch for you, as long as you let us know what engine modifications and tire size/type.
- Buttery smooth engagement, gets rid of the factory jerk off idle
- We especially recommend this with our tuning as it will allow for higher RPM which allows you to reach the peak power of the Ranger 1K motor
- A simply must have when running larger tires
- Faster acceleration
- Wicked throttle response and quicker down shifts
- Cooler running belt temps (especially when running larger tires)
- Longer belt and clutch life
- More consistent clutch performance
- Easily adjustable if needed
- Helix features a tighter roller & EBS pocket for less clutch slop(clunk) and less chance of rollers breaking
- Our Recoil clutch weights are easily adjustable with simple magnets. They have a custom AA profile, the BEST coating on the market (nitrocarburizing) which has increased wear resistance, improved fatigue strength, and added surface lubricity. These clutch weights also offer great performance, and the ability to tune for many different applications or modification in the future, without the need to buy extra parts. The magnetic weights are the best option to properly place the mass where we need it on the weight for best performance for your application.
- Our great setup guideline lets you know how to set the weights up for different size tires and other variables, as well as how to check to make sure clutching is setup correctly.
- DISCLAIMER/SPECIAL NOTES ABOUT THIS CLUTCH: This clutch is louder at idle as these clutches have a loose spider/slider tolerance until engine RPM ramps up. This clutch is tight under the cover and MAY slightly contact the plastic at idle, making a few wear marks(extremely uncommon, but we have seen it due to cover variances). The primary bolt has a turned down (shortened) head to clear under the cover. This is easier to strip, so use care when tightening and make sure you use an 18mm 6 point socket. If dissembling the clutch, the 6 spring cover button head Allen bolts are also easy to strip if you use the wrong size(or standard), they are a 4mm.
Free Shipping
At our company, we are proud to offer our valued customers free ground shipping on most orders over $100, a fantastic incentive to help you shop for your favorite items. Please note, this offer is applicable only to the lower 48 states within the United States. We strive to ensure that your products reach you in a timely and cost-effective manner. However, we would like to inform you that certain exclusions may apply due to the size, weight, or destination of the order. We kindly encourage you to review our shipping policies or reach out to our customer service team for any clarifications. We are committed to providing the best shopping experience possible, with quality service at every step of your journey with us.
Shipping
Shipping to US with verified payment & confirmed address. Domestic shipments are a mix of services from UPS, USPS, and FedEx. All packages may require a signature.
Delivery
Most of our products ship within 1 Business Day - Occasionally, we are out of stock on an item and will sometimes use a drop ship from one of our suppliers. Drop ships from a handful of suppliers can add up to 5 days processing time.
Refunds & Returns
PLEASE CALL US FIRST for an RMA (Return Merchandise Authorization) #.
All returns made to Revolution Off-Road, LLC must be in the original box with all parts included in new condition.
All returns must be sent with a copy of the original receipt, explanation of the problem and an RMA #.
All returns for must be received by Revolution Off-Road, LLC within 15 days of the product being received by the customer. (determined by UPS tracking #)
Customer is 100% responsible for ALL shipping costs on returned items. Thus, if you return an item and did not originally pay shipping costs, the original shipping cost incurred by us will be deducted from your refund.
Orders canceled by the customer will be subject to a 10% cancelation fee.
Any shipping costs paid by customer on original order, including ground shipping or expedited shipping will not be refunded including in the event of a return.
Credit will be issued after the product and its contents are inspected and found to be in brand new condition as shipped to the buyer.
All returns will be subject to a 20% - 30% restocking fee, depending on the manufacturer.
Shipments refused by you (the Customer) and returned back to Revolution Off-Road will carry an automatic 20% re-stocking fee deducted from the total credit owed.
Credit will not be issued in the following situations:
Product has been installed and or used. Product has been damaged from an attempt to install and/or use.
Product is shipped back without original box, manual and/or parts.
Seal on electrical parts is broken, or it is evident that electrical part has been installed to vehicle.
Product serial number does not match what was originally shipped to buyer.-Product is deemed not re-sellable due to customer's actions.
Electrical components after they have been installed.
Product Warranties
Revolution Off-Road, LLC honors all manufacturer warranties. Any product that carries a manufacturer warranty must be warrantied through its respective manufacturer. Installed components which have failed must be removed and shipped back to its manufacturer for inspection before replacement. Revolution Off-Road, LLC is not responsible for shipping products to manufacturers for inspection or the return shipping to the end user. Labor time is not paid by Revolution Off-Road, LLC.
Damaged Products
If a products arrived damaged you must contact Revolution Off-Road, LLC WITHIN 5 BUSINESS DAYS. Do not install the product as the manufacturer will handle shipping a replacement item. If you install the product then it will void any shipping claim as the product will need to be reviewed by sending pictures of any damage. Once again review your product before attempting to install it, if any damage is found, do not install.
Cores
There is a 30 day turnaround policy on cores from the time it was delivered.
