Name: Aftermarket Assassins Primary Clutch Fan | Polaris RZR 2016-2020 XP Turbo & 2018+ RS1
Brand: Aftermarket Assassins
SKU: 108-1016
Price: 95.0 USD
Availability: InStock

This primary clutch fan blade is a must have for anyone with the turbo/RS1 clutches! The primary clutch has fins on the back side to aid in airflow, but is lacking airflow on the spring side of the clutch. With this fan blade we scoop air and force nearly 50 CFM more air through the clutch ducting over stock above 8200 RPM. This results in a cooler running CVT system and less blown belts.
Fits 2016-2020 RZR Turbo, Turbo S, & 2018-Up RS1 models
Does NOT fit 2020-Up Pro XP or 2021 RZR Turbo or Turbo S models
For use only with stock primary clutch cover, does NOT fit with our AA Revolver Clutch Cover
On our meter in the factory clutch ducting, the stock CVT rated at 407 CFM @ 8200 RPM. With the clutch fan blade we saw 457 CFM @ 8200 RPM
Airflow is better at idle to wide open throttle and ramps up the higher the engine speed
Installs easily with the supplied longer bolts right over the factory spring plate
Adds support to the clutch towers for rigidity helping clutch life and performance
Weighs in at only .4lbs, so extremely lightweight
Made from anodized aluminum
Keep in mind if you are thinking of going with a CVT blower that they actually restrict airflow at higher RPM's where you need it most. Our clutch fan blade will perform better than any CVT blower from 5000 RPM and up where you need it most.
In rare occasions clearance your plastic clutch cover may be needed if the cover is slightly warped. This would be an extremely small amount and would not effect looks or performance of the clutch cover. Simply use sand paper or a die grinder if you see the fan blade rubbing (It would actually be the bolts rubbing).
Fits all 2016-2020 RZR XPT, Turbo S, and 2018+ RS1 Models

Well built

Although the bracket I got was the wrong one (my fault) the built quality was very nice and heavy duty

Blinker kit

Great product fairly easy to install

Delivered on time ! They look great. Ready to install

DirtBag Brands Lock & Load Tire Bonnet Kit

These work awesome. I used to have trouble with single strap rolling off the side of the tire, not no more. They do take an extra minute to put on but well worth it for the peace of mind your machine won't move. I purchased 2 kits so I could do all 4 wheels and it takes about 10 minutes to strap all 4 down. The install of the blocks was very easy and straight forward. I highly recommend. The guys at Revolution Offroad were great to work with

Aftermarket Assassins Stage 3 Clutch Kit Polaris RZR RS1

Aftermarket Assassins Primary Clutch Fan | Polaris RZR 2016-2020 XP Turbo & 2018+ RS1

Aftermarket Assassins Primary Clutch Fan | Polaris RZR 2016-2020 XP Turbo & 2018+ RS1

Let customers speak for us